Castable is the main type of unshaped refractory material. It is a granular and powdery material made of refractory substances, and a certain amount of binder and water are added to form the unshaped refractory material by pouring. It has high fluidity, is suitable for pouring construction, and can be hardened without heating.

The nozzle brick is the part closest to the furnace in the regenerative burner. Various gases are ejected from its round hole and burn directly in contact with the temperature of the furnace. Therefore, its position has the highest temperature and the most severe erosion. this...

The heat storage body is located behind the baffle brick, and the hole size can be designed according to the required flow rate. The regenerator material is zirconium corundum mullite, which has a high firing temperature and reduces the risk of breakage.

Refractory clay is made of fine powder and special binder and can be used directly. Under the conditions of natural drying in the air, good strength is generated and high-strength joints are formed, ultimately forming a brick masonry similar to an overall prefabricated structure.

Used in construction kilns and various thermal equipment, such as metallurgy, chemical industry, electric power, waste incinerators, cement kilns, discharge boxes, coolants and air distribution plates, slag discharge pipes, furnaces of circulating fluidized bed boilers, Cyclone separator, etc.

This product has good reliability and stability in various environments. Low thermal conductivity, good thermal insulation performance, small shrinkage at high temperatures. Low bulk density and low heat capacity greatly shorten the heating and cooling time of the kiln. Good tensile strength, chemical stability, corrosion resistance, good thermal shock resistance, easy cutting and installation.